公民水素养评价表征因素模型构建与分析

针对我国水资源紧缺、水生态损害、水环境污染等相关水问题,以提升全民爱水惜水节水护水的意识和能力为目标,从水素养概念出发,通过扎根理论质性研究方法对公民水素养评价的表征因素进行筛选和提炼,最终得出包含水知识、水态度、水行为为主范畴的10个表征因素并运用解释结构模型(ISM)深入剖析各因素之间的内在联系。在此基础上建立了3级多层次递阶结构模型,进一步精确描述系统各要素两两之间的直接关系。结果表明:公民水素养评价的表征因素自上而下形成了表象层、中间层和根源层等3个层级,可直观、清晰地反映表征因素之间的递阶、层级关系;水态度在各表征因素中具有调节作用以及各表征因素之间存在内在逻辑关系。研究成果为提高公民水素养水平提供一定的科学依据和政策参考。     

First principles computational studies of spontaneous reduction reaction of Eu(III) in eutectic LiCl‐KCl molten salt

Using first principles calculations, we study fundamental mechanism of spontaneous reduction reaction of Eu³⁺ to Eu²⁺ in eutectic LiCl‐KCl molten salt. We decouple the reaction Gibbs free energy into enthalpy and entropy contributions by using rigorous thermodynamic formalism. Key structural features of the solvation shell are characterized by the radial distribution function and the coordination number. Compared with Eu²⁺, the Eu³⁺ ion has a more rigid framework of the solvation shells, corroborating its stronger electrostatic interaction with neighboring ligands of Cl^? ions and a more favorable state on the aspect of enthalpy. Computations on vibrational frequency, however, pose significant contribution of vibrational entropy to the reaction Gibbs free energy for the reduction. Vibration frequency of Eu²⁺ is smaller than that of Eu³⁺, driving a more positive change of the entropy in the reduction reaction. Furthermore, an Eu²⁺ diffuses more quickly than an Eu³⁺ in the LiCl‐KCl molten salt with switching mechanism of ligand Cl^? ions in the solvation shell. Our results propose that the spontaneity of the reduction reaction is driven by the entropic contribution by overcoming the penalty of the reaction enthalpy.     

基于博弈分析的流域水资源配置

针对传统规划方法难以体现水资源配置过程中多种复杂因素的问题,基于博弈理论建立宏观调控和市场经济相结合的水资源配置动态博弈模型,求解其子博弈精炼纳什均衡下各博弈参与人的策略,并运用改进量子遗传算法求解该博弈模型。对A河流域水资源配置结果表明,在保证流域公共生态用水2.0×10~8 m~3的基础上,各用水子区自发约束自身的取水量,达到均衡时,社会总收益为11.27亿元,相比自由取水模型,社会总收益增加了0.95亿元,增幅为9.2%。     

纳米氧化锌/低密度聚乙烯膜中锌向食品的迁移研究

目的研究纳米氧化锌/低密度聚乙烯膜(low density polyethylene film,LDPE)中锌(Zn)向食品的迁移行为,探究其迁移规律。方法选取2种食品模拟物(3%乙酸及超纯水)及真实食品(食用白醋及瓶装水),在3种不同实验温度下(70、40及20℃),研究锌向食品模拟物的迁移规律。采用扫描电子显微镜(scanning electron microscope,SEM)和原子力显微镜(atomic force microscope,AFM)表征纳米ZnO/LDPE膜的表面形貌。结果锌向酸性模拟物中的迁移率远远大于水性模拟物中的迁移率,其中锌向酸性模拟物中的最大迁移率分别为22.7%,20.3%及18.6%(ZL-1,ZL-2及ZL-2#),向水性模拟物中的最大迁移率分别为9.9%,5.7%及4.9%(ZL-1,ZL-2及ZL-2#);锌向酸性食品的迁移量(1.59~5.03 mg/g)同样高于向水性食品的迁移量(2.98~24.60μg/g);随着纳米ZnO的初始含量变大迁移率变小;而偶联剂的加入对锌的迁移有一定的抑制作用。随着纳米ZnO浓度的增加,在薄膜中观察到纳米ZnO的不规则形貌。结论纳米ZnO/LDPE膜不适合在高温下包装食物,且其在酸性食品中的安全隐患高于水性食品。     

New exact solutions of the Tzitzéica-type equations in non-linear optics using the expa function method

One specific class of non-linear evolution equations, known as the Tzitzéica-type equations, has received great attention from a group of researchers involved in non-linear science. In this article, new exact solutions of the Tzitzéica-type equations arising in non-linear optics, including the Tzitzéica, Dodd–Bullough–Mikhailov and Tzitzéica–Dodd–Bullough equations, are obtained using the exp_a function method. The integration technique actually suggests a useful and reliable method to extract new exact solutions of a wide range of non-linear evolution equations.     

Estimation of power density in IMPATT using different materials

ABSTRACT

The RF output power dissipated per unit area is calculated using Runge-Kutta method for the high-moderate-moderate-high (n⁺-n-p-p⁺) doping profile of double drift region (DDR)-based impact avalanche transit time (IMPATT) diode by taking different substrate at Ka band. Those substrates are silicon, gallium arsenide, germanium, wurtzite gallium nitride, indium phosphide and 4H-silicon carbide. A comparative study regarding power dissipation ability by the IMPATT using different material is being presented thereby modelling the DDR IMPATT diode in a one-dimensional structure. The IMPATT based on 4H-SiC element has highest power density in the order of 10¹⁰ Wm^?2 and the Si-based counterpart has lowest power density of order 10⁶ Wm^?2 throughout the Ka band. So, 4H-SiC-based IMPATT should be preferable over others for the power density preference based application. This result will be helpful to estimate the power density of the IMPATT for any doping profile and to select the proper element for the optimum design of the IMPATT as far as power density is concerned in the Ka band. Also, we have focused on variation of power density with different junction temperatures and modelled the heat sink with analysis of thermal resistances.     

Mechanism of methanol decomposition on the Pd/WC(0001) surface unveiled by first-principles calculations

In this study, the decomposition of methanol into the CO and H species on the Pd/tungsten carbide (WC)(0001) surface is systematically investigated using periodic density functional theory (DFT) calculations. The possible reaction pathways and intermediates are determined. The results reveal that saturated molecules, i.e., methanol and formaldehyde, adsorb weakly on the Pd/ WC(0001) surface. Both CO and H prefer three-fold sites, with adsorption energies of −1.51 and −2.67 eV, respectively. On the other hand, CH₃O stably binds at three-fold and bridge sites, with an adsorption energy of −2.58 eV. However, most of the other intermediates tend to adsorb to the surface with the carbon and oxygen atoms in their sp³ and hydroxyl-like configurations, respectively. Hence, the C atom of CH₂OH preferentially attaches to the top sites, CHOH and CH₂O adsorb at the bridge sites, while COH and CHO occupy the three-fold sites. The DFT calculations indicate that the rupture of the initial C–H bond promotes the decomposition of CH₃OH and CH₂OH, whereas in the case of CHOH, O–H bond scission is favored over the C–H bond rupture. Thus, the most probable methanol decomposition pathway on the Pd/WC(0001) surface is CH₃OH → CH₂OH → trans-CHOH → CHO → CO. The present study demonstrates that the synergistic effect of WC (as carrier) and Pd (as catalyst) alters the CH₃OH decomposition pathway and reduces the noble metal utilization.     

船体结构冰载荷反演方法及试验验证

冰载荷是影响船舶冰区航行期间结构安全的重要环境载荷。船舶的冰压监测通常采用应变传感器，合理地布放传感器是识别冰载荷的基础。通过对比船体外板结构试验中的冲击载荷和不同测试方案下的应变信号，确定了最佳应变传感器布放方案；采用Green核函数方法建立了船体外板结构应变冲击载荷间的响应关系，并对采集信号在噪声影响下反演的不适定性进行了分析；采用Tikhonov正则化方法克服了载荷反演过程中出现的数值不稳定问题；最后将试验中的响应用到载荷识别分析中，反演的载荷可以较为准确地反映冲击载荷的时域特征并且载荷识别精度良好。     

Improving hydrogen evolution reaction and capacitive properties on CoS/MoS2 decorated carbon fibers

We report a facile method to transform abundantly dumped banana stem fibers into carbon fibers (CFs) useful for energy applications. The CFs surface area is increased by varying the quantity of KOH activation to 488 m²g^-1. The solvothermal method is used to synthesize CoS, CoS/MoS₂ and also grown on the activated carbon fibers (ACFs). Nano nodules of CoS arranged into sheets and layers of MoS₂ stacked together were found in FESEM analysis. The morphology of the CoS/MoS₂ differs when grown on ACFs. The growth of CoS/MoS₂ along the ACFs length prevents any stacking of the pseudocapacitance materials. The ternary composite ACFs/CoS/MoS₂ exhibits superior supercapacitor behavior as well as hydrogen evolution reaction (HER) due to the synergetic effect of the conducting ACF surface and redox active CoS/MoS₂. A maximum specific capacitance of 733 Fg^-1, energy and power density of 33 WhKg⁻¹ and 999 WKg^-1 respectively are obtained. A low Tafel slope value of 61 mVdec⁻¹ is obtained for the ACFs/CoS/MoS₂ ternary composite electrode. The present work therefore offers a fresh insight into the effective conversion of waste materials into electrode material for energy storage and conversion applications.     

Chest X-ray enhancement to interpret pneumonia malformation based on fuzzy soft set and Dempster–Shafer theory of evidence

Image enhancement algorithms are commonly used to increase the contrast and visual quality of low-dose x-ray images. This paper proposes an automated enhancement method using soft fuzzy sets with a new decision-making scheme based on Dempster-Shafer theory of evidence for the visual interpretation of pneumonia malformation in low-dose x-ray images, called as XEFSDS. The XEFSDS model first generates an original source x-ray image into a complementary image, then each original and complement image is applied to the characterized image object and background areas of fuzzy space. The S-function is utilized to define fuzzy soft sets for the classification of gray level ambiguity in both images, and hence a decision criterion via Dempster-Shafer approach and fuzzy interval has been adapted to discriminate uncertainties on the pixel intensity and the spatial information. Modified membership grade operations have been performed on each object/background area, and Werner’s AND/OR operator (an aggregation operator) has been utilized to build a new membership function from two modified membership functions. Finally, an enhanced image is obtained from the new membership function via defuzzification. Experiments on different pneumonia X-ray images demonstrate that the XEFSDS scheme produces better results than the existing methods. To show the advantages of the XEFSDS scheme, we have executed a segmentation based examination on enhanced image for the detection of pneumonia malformation as well as abnormal lobe (lobar pneumonia) or bronchopneumonia.